OnAccess Fabric Switch

The OnAccess 5224M is a high-performance managed 24+2G port Layer 2 fiber-optic Ethernet access switch with 2 Gigabit optical/electrical optional uplink ports. The downlink port can select 24 all-optical ports. Configuration or 12 optical ports 12 electrical ports mixed configuration, access to fiber media optional single mode fiber or multimode fiber. The switch supports both remote management and local management of the network to monitor port working status and switch settings.

The fiber port is particularly suitable for applications where the access point of the information point exceeds the access distance of the Category 5 line, the need for anti-electromagnetic interference, and the need for communication confidentiality, including residential FTTH broadband access network; enterprise high-speed fiber-optic LAN; high-reliability industrial distribution Control System (DCS); Optical Digital Video Surveillance Network; Hospital High Speed Optical LAN; Campus Network.

Product performance

Non-blocking storage-forward switching mode with 8.8 Gbps switching capability. All ports can work at full line rate at the same time. It supports 6K MAC addresses in full-duplex mode. It has automatic MAC address learning and update function to support port aggregation and provides 7 groups of aggregation. Broadband trunks support priority queues, provide quality of service support, support 802.1d spanning tree protocol/fast spanning tree protocol support, 802.1x port-based access authentication, support IEEE802.3x full-duplex flow control, half-duplex backpressure flow control support Tag-based VLAN/port-based VLAN/protocol-based VLAN, providing 255 VLAN groups, up to 4K VLANs supporting port-based network access control with port isolation with header blocking (HOL) prevention mechanism, maximizing Reduce packet loss support port and MAC address binding, MAC address filtering support port mirroring with SNIFF network monitoring function with port bandwidth control function Support IGMP snooping multicast control support broadcast storm control

Network management

Remote centralized network management: support SNMP, web-based management, Telnet; based on designated ports or 802.1Q VLANs to increase security. Local independent network management: through the standard RS-232 interface

Network standards and protocols

IEEE: 802.3, 802.3u, 802.3z, 802.3ab, 802.1d, 802.1p, 802.1q, 802.1v, 802.3ad, 802.3x, 802.1x IEFT:

RFC1157 SNMP, RFC 1112/2236 IGMP, RFC854 Telnet, RFC 1123/1493/1643 MIB

Port mode

Gigabit ports: 2 10/100/1000Base-TX RJ45 ports (fixed configuration) or 2 hot-swappable 1000Base-LX/SX SFP fiber module ports (optional configuration and single-mode/multi-mode modules are optional 100Mbit ports: 24 100Base-FX fiber ports, or 12 100Base-FX fiber ports and 12 10/100Base-TX RJ45 port configurations, access to fiber media, optional single mode fiber or multimode fiber

Optical fiber port working wavelength and transmission distance

100M port

Single fiber single mode, dual wavelength 1550nm/1310nm, 20/40km
Dual fiber single mode, single wavelength 1310nm or 1550nm, 20/40/60km
Dual fiber multimode, single wavelength 1310nm, 2km Gigabit port
Double fiber 50/125μm multimode, wavelength 850nm, 550m;
Double fiber 62.5/125μm multimode, wavelength 850nm, 275m;
Dual fiber single mode, wavelength 1310nm or 1550nm, 10/20/40/60km

power supply

AC 176-264V/1.2A, 50/60Hz DC 18-36V/2A DC 36-72V/1.5A Power Consumption: 35W

Physical and environmental parameters

Standard 19-inch rack mounting width, 1U high weight 4 kg working temperature: 0 ° C – 50 ° C Storage temperature: -25 ° C – 55 ° C degrees Relative humidity: 5% – 95% non-condensing

Amra Author

Leave a Reply

Your email address will not be published.